PULSAR TAXIMETERS 

     C.Of C.# 97-055
Click on a meter model for photos, more detail and a purchase button on the PayPal system! Allow ten working days for production, plus shipping time.

Pulsar has replaced the 2020 meters with the newer 2030 and 2030R meters. They fit the same frame and connector, and work the same as the older ones. And they look sleek and slim!

Pulsar 2030 Taxi Meter    < Click here for the 2030
The 2030 Taxi Meter features a metal case, bright display and simple
operation. It interfaces with the host vehicle via an external 
device that conditions and adjusts the pulses entering the meter.  $245.00*
      *BUY THREE OR FOUR AND DEDUCT $10.00 PER UNIT, BUY 5 OR MORE AND DEDUCT $20.00 PER UNIT! 

Pulsar 2030R Printing Taxi Meter   < Click here for the 2030R
The 2030R meter has all the features of the 2030, Plus a built-in
impact printer for generating receipts and statistical reports.        $385.00*
      *BUY THREE OR FOUR AND DEDUCT $10.00 PER UNIT, BUY 5 OR MORE AND DEDUCT $20.00 PER UNIT! 

Click on the BLUE phrases above for more information and photographs of the equipment and for the shopping cart to buy them. 
Contact Us for any additional information you'd like! Thank YOU! When ordering, e-mail us your rates and we'll preprogram it free!

Pulsar Programming Plug

  Pulsar Programming Plug for 2020 and 2030 series meters

Click here to purchase a programming plug $5.00 + 4.75 shipping US Priority Mail.

 Here's a great idea!

Upgrade your old Pulsar meters to Top Quality with Centrodyne, in three minutes,  without having to rewire your taxicabs !!
Pulsar 2010 meters are no longer being renewed for type acceptance!  Get current technology, a new warranty, and top quality!
 This harness adaptor works to upgrade 2010, 2020, 2020R, 2030, and 2030R Meters!
 You'll discover Centrodyne meters are easy to program, simple to calibrate, perform flawlessly for a very long time.

Y081 Adaptor

Alternate Harness: Adapts to Old Pulsar Harnesses. Pull old Pulsar brand meter out of car, insert this device, and plug in new Centrodyne 610 or 620 Printing meter! It's that simple! Your new Centrodyne meter has extra features you'll appreciate, and service  quality you will come to love! If not satisfied with this device, we'll swap it with you for the original harness shown above! Just call 760-345-4347 for an RMA and send it back!

HAVE YOU A FLEET OF OBSOLETE PULSARS YOU'D LIKE TO UPGRADE? WE WILL FURNISH YOUR NEW CENTRODYNE  METERS WITH THESE ADAPTORS INSTEAD OF THE WIRING HARNESSES. NO INCREASE IN PRICE! YOU CAN SWAP THESE OUT IN ABOUT THREE MINUTES, CALIBRATE YOUR NEW METER AND YOU'RE READY FOR INSPECTION! CALL 760-3435-4347 FOR DETAILS!!
 

Click here to purchase a new C610 meter with Adaptor Harness - E-Mail us your rates and we'll preprogram it too! $245.00 Be sure to e-mail us your rates. fred@taxicabelectronics.com is the address.

Click here to purchase one Y081 Adaptor without the meter. $49.00  You use it with your old Pulsar wiring instead of re-installing all the cables and connections. Your toplights and connections do not change, and they work just as they always have, only better!!

HOME PAGE

All products, allow ten working days for production, plus shipping time.