THIS PAGE FOR THINGS TO MAKE LIFE EASIER FOR OUR INDUSTRY!!
MORE ACCESSORIES for your meter installations
CENTRODYNE VSS PULSE DIVIDER AND CONDITIONER. Older Version: Y060 Upgraded Version Z063 (Z063 ships for all orders by either number).
Buffers taxi circuit from car's electronics preventing interaction from the
device
or the meter to the car's sensitive circuits, and puts pulses into meter's
acceptable
range if the ratio is too great. $48.00
You will probably need this if you are outfitting late model Chrysler, Dodge or Plymouth Vans, and many other units as well.
NEW PRODUCT ! QUICK-PLUG-IN CAN-BUS DECODER UNIT
 |
Our OBDII-1 device is for American
Vehicles. Our OBDII-2 device is capable of either Can (standard on American Vehicles) or ISO (some Asian and European Vehicles) Give us the EXACT Make, Model and Year of the vehicle and we will supply the correct device. Simply plug in this device under the dashboard, connect one additional wire to the "accessory" circuit so the device sees the key switched power on or off, and connect one wire to the taximeter pulse input line. Simple enough even a technician (like me) can do it! :-) This device will work with any taximeter brand or model. The output leads provide a distance pulse for taximeters, navigation and other devices. They are easy to install, and these new devices require no programming or adjustments in the field. (FOR ALL ELECTRIC VEHICLES i.e. Nissan Leaf, CALL US BEFORE ORDERING - 760-345-4347.) . "I dont understand what a pulse is for, or how it works." - click to learn!! |
THIS DEVICE CREATES PULSE FOR TAXI METER FROM CAR'S COMPUTER CIRCUITRY... AS CLOSE TO "PLUG AND PLAY" AS YOU CAN GET.
Trunk lid signs
for advertising on your taxi cab. Click here!
AMPLIFIER FOR MOBILE NARRATION ON LIMOUSINES, SMALL BUSSES, OPEN VEHICLES
Model PAT20TB Mobile Amplifier by Speco;
Has input for microphone, and an input for auxiliary source such as a tape
recorder or radio receiver. This monophonic amplifier has separate gain controls
for each input and a simple tone control for the system sound quality. It is
powered from the vehicle battery by direct connection or by cigarette lighter
plug. Connections are simple, clean and dependable. The power switch is a
latching press on press off type with a visible LED power indicator. Rubber feet
can be removed if the unit is to be Velcro®-attached
to a surface. Push-To-Talk Microphone is furnished with the amplifier. Headset
can be used with addition of PTT jumper inside. Good Quality Sound for your
tour and narration services. Power rated at 20 watts - enough to do the job but
not overkill! NEW! Now has Talk Back feature - button not shown
above. Contact us for speaker and inter-connection
recommendations 760-345-4347.
LIGHTED ADVERTISING
SIGN INSIDE THE VEHICLE
MAKES MONEY FOR YOU WHILE YOU PAY ATTENTION TO THE ROAD.
. 
13" Flex Mount
This device, like your Minister's microphone stand, but way sturdier, places your taximeter
where your clients can see it, without destroying your dash panel! Black only. NO HOLES IN THE DASH! $45.95
WORKS WELL WITH ALL NON-PRINTING TAXI METERS, ESPECIALLY PULSAR 2030 AND CENTRODYNE S700.
"PIGTAIL" Replacement assembly for our toplight sockets.
This is the special grommet and tip assembly with wire, which fits into the socket above the spring.