CENTRODYNE CAB METERS,  TAXIMETERS, PRINTING TAXI METERS TOO!  and the GREAT NEW S700 Meter!  
Click on a meter model for photo, more detail and a purchase button on the PayPal system!

C.Of C.# 93-128 for 610/620 Series meters, . .New!CC# 10-051 for new S700 Taximeter.
We can include clear instructions with each meter we sell, for a nominal additional fee. and assistance with mounting and hookup information
for your vehicle. We can usually help you with outfitting problems... feel  free to e-mail or call us.. see below.

Centrodyne Silent 610 Taxi Meter with built in pulse interface, smart-meter
    resettable shift statistics, and battery saving timer                 $245.00 

      BUY THREE OR FOUR AND DEDUCT $10.00 PER UNIT, BUY 5 OR MORE AND DEDUCT $20.00 PER UNIT! 
GoToAddToCartButton . C610

 

Centrodyne Silent 620 Taxi Meter with all 610 features and a built-in thermal printer for receipts, statistics, smart-meter NEW LOWER PRICE! $365.00
      BUY THREE OR FOUR AND DEDUCT $10.00 PER UNIT, BUY 5 OR MORE AND DEDUCT $20.00 PER UNIT! 
GtToAddToCartButton . . . C620

 

Centrodyne S700 Taxi Meter with all new features, fully loaded firmware, 16-rate capable, complete individual stats for 250 rides! Complete redesign!
INTRODUCTORY PRICE . . .$250.00 - Quantities May Be Limited - New Item!
      BUY THREE OR FOUR AND DEDUCT $7.00 PER UNIT, BUY 5 OR MORE AND DEDUCT $14.00 PER UNIT! 

S700 GoTo Button
. .S700 Meter
.

When ordering any taxi meter from us, please e-mail us your rates so we can pre-program the meter for you before shipping. Fred@TaxiCabElectronics.com is the address.


 
Centrodyne Taximeter Harness and Cable Kit (replacement for original kits furnished with meters)
THIS HARNESS FOR ALL C610 AND C620 METERS. See below for S700 information.
Bracket, Connector, Cable exactly replaces original, or...
put one or more on the shelf in order to pre-wire a car for emergency use! Now when a car goes out of service -
transmission, body work, blown engine etc. - you grab that meter and use it for your spare car. Just swap it in,
calibrate it, and you're ready for inspection. Minimum down time. Fewer gray hairs too! (I like THAT!)

My Best Contact Telephone No.
<<<Click here to order a Centrodyne 600-series harness kit for $59.00 + shipping

700 Base + Cable . Extra Plugs in S700 Base The new Centrodyne S700 meter has a new multi-functional bracket/base system, and thus far, this is not available as a separate item: It WILL be available after initial production runs of meter. Of course, one fully functional mount/bracket/base/cable kit is included with each S700 meter shipped. A plug-In cable kit (mates with socket in base) is also included with each additional item such as printer. The revised base has securing bolt in the center of the bottom plate (not yet shown here).
My Best Contact Telephone No.
"<<== click here to order the S700 replacement base/harness/cable assembly for $65.00 + shipping.

To add a toplight control relay to your order, click here: RELAY (Used to turn the toplight [or parts of it] ON and OFF when you switch your meter on or off.)

To add a pulse divider interface unit (Z063[Y060upgraded]) Click here: Z063 PULSE DIVIDER. (Needed for most Dodge Caravans, Plymouth Voyager, Chrysler Town & Country, and many other vehicles.)


 

Similar Bracket Kit for Pulsar Meters also available, at a slightly higher price. Click the blue link.



Replacement Seal Door and Bolt for Centrodyne C610, C620 or S700 taximeters
:
(If you have lost your door and bolt, you need these to get that meter properly sealed.)

Bolt & Door . C620Door . S700SealDr+Bolt . pULSARDOORS
Cent 610 Seal Door & Bolt.. . .Cent 620 Slide Seal Dr, Bolt . . . . Cent S700 Seal Door & Bolt . . . .. Pulsar 2030's Pulsar 2020's

3 Centrodyne 2 Pulsar Models:

FHD61 Fits Centrodyne 610 meter - Metal Door & Bolt
FHD62
. Fits Centrodyne 620 - Metal Slide Door & Bolt
FHD70
Fits Centrodyne S700 Meter Plastic Door & Bolt

FHD30 .Fits Pulsar 2030 and 2030R Meters - Door and Bolt
FHD20 .Fits Pulsar 2020 and 2020R Meters - Door and Bolt

FHD Series
My Best Contact Phone no.
< select proper seal for meter type, then click here to order. Allow shipping time of several days.

 


Replacement Printer Supplies: Centrodyne 620 Printer Thermal Paper: Pack of Ten Rolls  $10.00 . . . . . . (These rolls also fit your Pulsar 2030R and 2020R printers.)

click to order 1 ten-roll pack THERMAL paper for C620 printer

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Centrodyne 610/150 Paper - impact type remote printer NON-thermal   $10.00
click to order 1 ten-roll pack if IMPACT type paper for the old Centrodyne 610/150 printing meter.
Centrodyne 610/150 Printer Ribbon One Each  $8.00
click to order one printer ribbon for Centrodyne Model 150 impact printer

We are an authorized Centrodyne Corp. Dealer. Contact us for information
regarding warranty, add-on devices to existing meters, service or set-ups.

Prices updated 10/30/2011 Subject to adjustment, plus sales tax where required, and shipping. We provide you with the best advice available to us regarding your installation, calibration and use of these products. Your information is always safe with us. Yoiu don't need a PayPal account to use this website site, but Credit card purchases cleared through the PayPal system are over secure channels, and any client information we gather is NEVER provided to others, sold or otherwise distributed. When the business has your name on it, your word is your bond. Works For Me! Fred Stock Electronics, Palm Desert, California.
fred@taxicabelectronics.com . 760-345-4347 8-5 M-F Pacific. If no answer, machine will record your message. We WILL return your call! Give us your name & number twice with message.

HOME PAGE      TOPLIGHTS/SIGNS      
CONTACT US
       BACK-UP SENTRY